Place the AP4131 firmware file 'dsap3_fw.bin' and html file 'dsapt3htm.bin' (if html file is. For 'TFTP update THIS Access Point's' select 'both' if you have. Transitional firmware versions are fully supported in Avalanche. For example, when updating the WS5100 v1.4+ to a WS5100 v3.0+, you must. Cisco 350 AP. 2.3.2.0-008R 2.3.1.0-004R 2.3.0.0-019R 2.2.2.0-001R 2.2.1.0-007R.
Example: admin(system.config)> show cfg filename: cfg.txt cfg filepath: ftp/tftp server ip address: 192.168.0.101 ftp user name: myadmin ftp password: ******** For information on importing/exporting AP-5131configurations using the applet (GUI), see Importing/Exporting Configurations on page 4-37. Command Line Interface Reference 8-179 AP5131>admin(system.config)> set Description: Sets the import/export parameters. Syntax: set file Sets the configuration file name (1 to 39 characters in length). Path Defines the path used for the configuration file upload. Server Sets the FTP/TFTP server IP address. User Sets the FTP user name (1 to 39 characters in length). Passwd Sets the FTP password (1 to 39 characters in length). Example: admin(system.config)>set server 192.168.22.12 admin(system.config)>set user myadmin admin(system.config>set passwd georges admin(system.config)> show cfg filename: cfg.txt cfg filepath: ftp/tftp server ip address: 192.168.22.12 ftp user name: myadmin ftp password: ******* For information on importing/exporting AP-5131configurations using the applet (GUI), see Importing/Exporting Configurations on page 4-37. 8-180 AP-5131Access Point Product Reference Guide AP5131>admin(system.config)> export Description: Exports the configuration from the system. Syntax: export ftp Exports the AP-5131configuration to the FTP server. Use the set command to set the server, user, password, tftp and file name before using this command. Exports the AP-5131configuration to the TFTP server. Use the set command to set the IP address for the TFTP terminal server before using the command. Exports the AP-5131configuration to a terminal. Command Line Interface Reference 8-181 AP5131>admin(system.config)> import Description: Imports the AP-5131configuration to the AP-5131.Errors could display as a result of invaid configuration parameters. Plaxis 3d 2011 crack. Correct the sepcified lines and import the file again until the import operation is error free. Syntax: import ftp Imports the AP-5131configuration file from the FTP server. ![]() Tftp Use the set command to set the server, user, password, and file. Imports the AP-5131configuration from the TFTP server. Use the set command to set the server and file. 8-182 AP-5131Access Point Product Reference Guide 8.4.8 Firmware Update Commands AP5131>admin(system)>fw-update Description: Displays the firmware update submenu. The items available under this command are shown below. NOTE The AP-5131must complete the reboot process to successfully update the device firmware, regardless of whether the reboot is conducted uing the GUI or CLI interfaces. ![]() Show Displays the current AP-5131firmware update settings. Set Defines the AP-5131firmware update parameters. Update Executes the firmware update. Goes to the parent menu. / Goes to the root menu. Save Saves the current configuration to the AP-5131system flash. Quit Quits the CLI and exits the current session. Command Line Interface Reference 8-183 AP5131>admin(system.fw-update)>show Description: Displays the current AP-5131firmware update settings. Syntax: show Shows the current system firmware update settings for the AP-5131. Example: admin(system.fw-update)> show automatic firmware upgrade: enable automatic config upgrade: enable automatic upgrade interface: WAN firmware filename: APFW.bin firmware path: /tftpboot/ ftp/tftp server ip address: 168.197.2.2 ftp user name: pkeegan ftp password: ******* For information on updating AP-5131device firmware using the applet (GUI), see Updating Device Firmware on page 4-41. 8-184 AP-5131Access Point Product Reference Guide AP5131>admin(system.fw-update)>set Description: Defines AP-5131firmware update settings and user permissions. Syntax: set fw-auto When enabled, updates device firmware each time the firmware versions are found to be cfg-auto different between the AP-5131and the specified firmware on the remote system. When enabled, updates device configuration file each time the confif file versions are iface found to be different between the AP-5131and the specified LAN or WAN interface.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |